Composites Design and Manufacture Lecture
PowerPoint
Reading
Lists
Review
papers
Subject
Index
acmc icon

Composites Design and Manufacture is a core module for the BEng/MEng (honours) Mechanical Engineering with Composites (MEC) course.  The UCAS codes are H302 (BEng)/H306 (MEng) and the UoP codes are 3126 (BEng)/4451 (MEng).  More information is available in the BEng (honours) Programme Specification.  The composites degree is accredited by both IMechE and IOM3 (see links in the menu to the right or the Table below).  This module was an option embedded in STAD322 for the BEng/MEng (honours) Civil Engineering course during 2007-2012.  The Digital Learning Environment (MooDLE) and Definitive Module Record (DMR) can be accessed via the following links:

For the MEC course, this module is complemented by two other modules: MATS348 Composites Engineering and MFRG311 Quality Management II. These three modules are regarded as integral parts of the learning for this degree pathway and will be essential to satisfactory completion of the course.  These modules provide an integrated approach to structural analysis, design, materials and processing selection, and quality issues for composite materials.  This module aims to:

  • develop a broad understanding of the diverse range of constituent materials and to appreciate the principles which guide their selection for engineering applications
  • appreciate the range of manufacturing processes for composite materials and to understand the interactions between manufacture, quality and performance.
The support material for this course has been partitioned into the following sections:
Theme  Topic (book icon from SoftIcons)  Lecturer Overview  Reading lists (book icon = recommended key texts)
A  Materials Selection and Characterisation  John Summerscales Selection  Characterisation ILS TalisAspire  JS' list A  book icon  book icon
B  Stress Analysis (now in MATS348)  Stephen Grove   ILS TalisAspire  JS' list B   book icon   book icon   book icon   book icon   book icon
C  Manufacturing Processes  John Summerscales Manufacturing
ILS TalisAspire  JS' list C   book icon   book icon

This twenty-credit module was "new" in Academic Year 2004/05 as MATS324 and renumbered as MATS347 from AY 2015/16.  It combines two former ten-credit modules:
Former module codes 2004-2015 2003-2004 2001-2003 1995-2001 1993-1995 1990-1993
Composites Design MATS 324 MATS 322 MATS 318 MATS 313 MATS 302 MC3.1 Materials for composites
MC3.2 Engineering composite structures
Composites Manufacture MATS 324 MATS 323 MATS 319 MATS 314 MATS 303 MC3.3 Composite manufacturing processes
MC3.4 Composite manufacturing systems

Do consider membership of the following professional organisations, not least because the composites BEng degree is accredited by the first two:
IOM3 logo  BCS logo
IMechE logo
SAMPE logo

Primo is the single place where you can find resources to support your learning, teaching and research.
The Library catalogue uses the Dewey system.  The following shelfmarks are relevant to this course:

Composite materials Man-made fibres Polymer chemistry Polymer technology Reinforced plastics Textiles
620.118 547.85 547.84 668.4 620.1923 677

and the following resources cover most issues:

The Granta CES EduPack software is "the world-leading teaching resource for materials in engineering, science, processing and design".  The Plymouth University license agreement permits students and staff to load the software on their home computer/laptop.  The instructions can be found in the announcements on the MATS347 and MATS232 MooDLE sites.


HEALTH & SAFETY
It is important that all students are aware of the Health and Safety considerations for this module.  You will be required to attend the Health and Safety presentation and to sign to confirm that you have done so before you will be allowed to use the facilities in the ACMC laboratory (Brunel 007). This support material can be accessed online.


ADVANCED COMPOSITES MANUFACTURING CENTRE
The centre (usually abbreviated to ACMC) embraces the undergraduate teaching, postgraduate research and commercial research - development - consultancy activities within the School of Engineering at the University of Plymouth.
COMSOL MATERIALS LIBRARY
The Material Library contains data for 2500 materials including the elements, minerals, soil, metal alloys, oxides, steels, thermal insulators, semiconductors, and optical materials. You specify a material in the Material Library browser, which enables you to easily find the desired material by name, or UNS (Unified Numbering System) number. Each material is represented by referenced property functions for as many as 24 key material properties, such as thermal, elastic, or electrical properties, depending on some variable, typically temperature. You can plot and inspect these function definitions, as well as change and add to them. They are then used in any coupling to other physics simulations that also depend on the property function variable in your multiphysics modelling.
ONLINE RESOURCES
If you are working off-campus and need Athens authentication to access PlymNet electronic resources (you will need your PlymNet ID and password), precede the URL with ...
   https://exchange.plymouth.ac.uk/portal/library/rl=

Return to the School of Marine Science and Engineering home page


Updated by John Summerscales on 24-Feb-2017 18:53. Terms and conditions. Errors and omissions. Corrections.